Maintenance
Engine Oil change
Drain the engine oil when the engine is warm. Warm oil drains quickly and completely.
1. Stop the engine and remove spark plug cap.
2. Place a suitable container next to the mower to catch the used oil.
3. Wipe the oil filler area clean, then remove the oil filler cap/dipstick.
4. With the throttle lever in the STOP position and the fuel tap in the off position to reduce the
possibility of fuel leakage, tilt the mower on its right side. The used oil will drain through the
filler neck. Allow the oil to drain completely.
Please dispose of used engine oil in a manner that does not harm the environment. Do not
throw it in the trash or pour it on the ground or down the drain.
4. Fill with the recommended Honda Premium Engine Oil 10W 30 (API classification SG
up to SJ). Do not overfill, measure the oil level as shown on page 9.
NOTE: Do not screw dipstick in when checking oil level.
Engine oil capacity is:
0.55 litres (HRU19RPU, HRU19DPU, HRU197PU, HRU197DPU &
HRU217DPU).
0.65 litres (HRU196PU, HRU196DPU, HRU216SU & HRU216DSU).
19
To Next Page
Loading...
Need help?
General
