Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat
tyre, can be a major inconvenience.
Check the following items before you get on
your vehicle:
● Fuel level - Fill fuel tank when necessary.
2 P. 69
●
Throttle - Check for smooth opening and
full closing in all steering positions. 2 P. 104
●
Engine oil level - Add engine oil if necessary.
Check for leaks. 2 P. 96
●
Coolant level - Add coolant if required.
Check for leaks. 2 P. 98
● Brakes - Check operation;
Front and Rear: check brake fluid level and
pads wear. 2 P. 101, 2 P. 102
● Lights and horn - Check that lights,
indicators and horn function properly.
● Engine stop switch - Check for proper
function. 2 P. 44
● Side stand ignition cut-off system - Check
for proper function. 2 P. 103
● Wheels and tyres - Check condition, air
pressure and adjust if necessary. 2 P. 89
20201006171709_32K1BF000_eng_BOOK Page 85 Tuesday, October 06 2020 17:20:39 JST
Maintenance
82
To Next Page
Loading...
Need help?
General