Honda NSS350A E 2020 User Manual

Unlock the Ignition Switch in an Emergency
#
Set up to ID number input mode
1. Use the emergency key to open the seat.
2 P. 120
2.
Remove the battery lid. 2 P. 95
3. Remove the tape wrapped around the
harness.
4. Pull out the EM mode connector.
5. Remove the blue dummy coupler by
releasing the tab of the EM mode
connector while lifting the hook of the
blue dummy coupler.
6. Check the ID number on the ID tag.
7. Connect the EM mode coupler provided
in the tool kit to the EM mode connector.
20201006171709_32K1BF000_eng_BOOK Page 125 Tuesday, October 06 2020 17:20:39 JST
Troubleshooting
122
EM mode
connector
Blue dummy
coupler
HookTab
EM mode coupler
Tape
ID number

Honda NSS350A E 2020 Specifications

General

Brand	Honda
Model	NSS350A E 2020
Category	Scooter
Language	English