Honda Remote Engine Start System II User Manual

© 2012 American Honda Motor Co., Inc. - All Rights Reserved. 19
Checking Vehicle Condition
You can check the vehicle condition on the transmitter
display by performing the following operation:
• Push the engine/command button 2 times on the
transmitter for 1 second or less.
NOTE: This function does not work when the ignition
switch is in the ON (II) position or engine start/stop
button
*1
is ON.
B127060H
ENGINE/
COMMAND
BUTTON
Items that can be checked:
• The engine is running
Engine is idling
*1
/Remaining time of
idling/In-car temperature
*2
*1 When starting the engine with the remote
engine starter system.
*2 Only on vehicles equipped with the
automatic climate control.
This indicator is displayed for some
vehicles among them.
• About In-car temperature
: In-car temperature is below 32°F (0°C).
: In-car temperature is 32°F - 50°F (0°C - 10°C).
: In-car temperature is 50°F - 68°F (10°C -
20°C).
: In-car temperature is 68°F - 86°F (20°C -
30°C).
: In-car temperature is 86°F - 104°F (30°C -
40°C).
: In-car temperature is 104°F (40°C) or above.
*1 Only on vehicle equipped with the keyless access system.
B127561H
*2

Honda Remote Engine Start System II Specifications

General

Brand	Honda
Model	Remote Engine Start System II
Category	Remote Starter
Language	English