Honda Remote Engine Start System II User Manual

32 © 2012 American Honda Motor Co., Inc. - All Rights Reserved.
B127751H
Transmitter Battery Replacement
1. Touch your hands to any metal part of the vehicle to
discharge any static electricity.
2. Remove the battery cover.
3. Remove the old battery.
4. Install new lithium battery (CR2032) into the
transmitter with the positive (+) mark toward the
battery cover.
5. Install the battery cover.
6. Push the lock button on the transmitter. The buzzer
should sound indicating that the battery is installed
properly.
BATTERY
COVER
COIN
LITHIUM BATTERY
CR2032
SOFT CLOTH
SOFT CLOTH
SMALL FLAT-TIP
SCREWDRIVER
Discharge any
static electricity.
Instructions:
Perchlorate material special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate

Honda Remote Engine Start System II Specifications

General

Brand	Honda
Model	Remote Engine Start System II
Category	Remote Starter
Language	English