74
Removing & Installing Body Components
Battery
❙
Removal
Make sure the ignition switch is off.
1.
Remove the seat.
2
P. 78
2.
Unhook the rubber strap.
3.
Disconnect the negative
-
terminal from
the battery.
4.
Disconnect the positive
+
terminal from
the battery.
5.
Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
+
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock is set to the proper time
after the battery is reconnected.
2
P. 24
For proper handling of the battery, see
“Maintenance Fundamentals.”
2
P. 62
“Battery Goes Dead”
2
P. 117
Battery
Rubber strap
Positive
terminal
Negative
terminal
To Next Page
Loading...
Need help?
General
