Other Adjustments u Adjusting the Rear Suspension
98
Adjusting the Rear Suspension
❙
Spring Preload
You can adjust the spring preload by the
adjuster knob to suit the load or the road
surface. Turn clockwise to increase spring
preload (hard), or turn counterclockwise to
decrease spring preload (soft). The standard
position is 7 clicks (VFR1200X/XA)/9 clicks
(VFR1200XD/XDA) from the minimum
setting.
Do not turn the adjuster beyond its natural limits.
Adjust both left and right forks to the same spring preload
and rebound damping.
Adjuster knob
To Next Page
Loading...
Need help?
General
