Honeywell 954 SmartServo FlexLine User Manual

Part No: 4417341 Revision 10 Installation Manual 25
954 SmartServo FlexLine
CAUTION!
Do not make any additional holes in the housing.
WARNING!
Make sure that no explosive gas mixtures build up in the working area.
Installing the Cable Glands and Stopping Plugs
WARNING!
Only use Ex e or flameproof certified materials of an appropriate IP value.
CAUTION!
Improper installation of cable glands or stopping plugs will invalidate the Ex approval of
the 954 SmartServo FlexLine.
5.4.1. Cable Glands
Use Ex e or Ex d 3/4" NPT cable glands (or where applicable equivalent conduit
connections) with an appropriate IP value. See the type plate on the device.
NOTE:
Install the cable glands according to the instructions provided by the manufacturer.
5.4.2. Unused Cable Inlets
Seal unused cable inlets with approved ¾” NPT threaded stopping plugs.

Honeywell 954 SmartServo FlexLine Specifications

General

Brand	Honeywell
Model	954 SmartServo FlexLine
Category	Measuring Instruments
Language	English