Instructions for Use
11.
Motor Protective Features
4. This appliance has been designed with a temperature controller which can automatically cut off the
power supply of the motor to prevent overheating. When the air-inlet or air-outlet pipe is overloaded or
blocked, the temperature of the motor rises hence the temperature controller cuts off the power supply
to the motor automatically allowing the motor to cool, preventing the cleaner from being damaged.
If the temperature controller is cut off, stop the cleaner immediately and pull out the power cable to
allow the cleaner to cool, and check and remove the debris that is blocking the air inlet (this may be
in the floor head, the hose or the spile), and replace the HEPA filter or filter gauze when required.
After allowing the motor to cool for 30 minutes, plug in the power cable and check whether the
temperature controller has been reset. If the power supply of the cleaner hasn’t been cut off, the
temperature controller of the motor won’t be reset even when the motor has become cool.
Accessories
Carpet Hard Floors
Ideal for daily cleaning on
carpets and hard floors.
To Next Page
Loading...
Need help?
General
