Hoover CleanJet User Manual

EMPTYING THE DIRTY WATER TANK CLEANING THE EXAUST FILTER
- 8 -
CLEANING THE PRE MOTOR FILTER
located under the dirty
water tank.
Rinse under hand warm
water to remove any debris.
Allow to completely dry
before returning to the
cleaner.
chamber.
Rinse under hand warm
water to remove any
debris. Allow to completely
dry before returning to the
cleaner.
chamber.
Do not wash filters in the
washing machine.
release latch.
!
WARNING: Ensure both filters are
fitted to the cleaner before use.
IMPORTANT: Clean the filters
after each use.
!
Press the dirty water tank release lever.
1
Turn the tank cap anti-clockwise to
open.
3
Empty the tank. Rinse the tank with
clean water and allow to dry before
storing the cleaner.
2
4
!
!
WARNING: Always switch the cleaner off and unplug it from the
electrical sock before emptying the dirty water tank.
WARNING: DO NOT exceed the max fill line on the dirty water tank.
!
!
Remove the dirty water tank from
the cleaner.
Do not wash filters in washing machine.

Hoover CleanJet Specifications

General

Brand	Hoover
Model	CleanJet
Category	Vacuum Cleaner
Language	English