16.
REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi
technology that allows the machine to be
remote controlled via an app.
⚫ Download the hOn App on your device by
framing the following QR code:
or by the link:
go.haier-europe.com/download-app
⚫ Make sure your smartphone/tablet is
connected to your home Wi-Fi network.
⚫ Turn the BLUETOOTH on your
smartphone/tablet (if available).
⚫ Open the App, create the user profile (or
log-in if it is already created previously)
and pairing the appliance following the
instructions on the device display or the
procedure described in the "Quick
Guide" that comes with the appliance.
⚫ Turn on the dishwasher by pressing the
ON/OFF button for 3 seconds when
instructed to do so in the app.
⚫ Press "REMOTE CONTROL" button for
3 secs → the message "ENROLMENT"
will scroll on the display and the "
Wi-Fi
"
indicator light will be off.
⚫
Within 60 secs. keep the
"DELAY START"
button pressed for 3 secs., and the
message "EASY" will appear on the
display for 5 mins, the Wi-Fi indicator light
will start to flash slowly 3 times and then
turn off for 2 seconds.
⚫ Enter the password of your home
Wi-Fi
network in the App and complete the
procedure.
Successful pairing
⚫ The message "CONNECTED" will appear
on the display once, after which the message
"REMOTE CONTROL" will appear and
the
"Wi-Fi"
indicator light will be steady on.
⚫ You can now control the machine from
the App.
Unsuccessful pairing
If enrolment fails (or does not succeed
within 5 mins.):
⚫ "TRY AGAIN" will appear on the display.
⚫ The machine will not be connected.
⚫ Repeat the pairing procedure from the
App.
In case of problems or change of the home
router settings (e.g.: change network
name/password, internet supplier, etc...)
you have to perform the pairing procedure
again, removing the product from the App,
or changing the Wi-Fi network credentials
from the appliance settings, within the App.