EN-15
Using the Boost
Using the Boost to get larger powe
Boost is the function that one zone rising to a larger power in one second and
lasting for 5 minutes. Thus you can get a more powerful and faster cooking.
r
2. The Boost power will last for 5 minutes and then the zone will go back to the “9”
power stage
1. Touch the control panel button that you wish to boost, then hold the “b” for 3
second. The power display will show “P” to indicate that the zone is boosting.
.
3. If you want to cancel the Boos
t during this 5 minutes, touch the “B” button for
twice. The heating zone will go back to “9” power stage. Or slide along the “—” to
the left point, the heating zone will go back to the power stage in which you
touched.
or
Restrictions when using
The five zones were divided into two groups. Please make sure that only two
zones work at the same time for each group if use boost function.
If use boost function on one zone of left or right side, the other zone at the same
side should work at or be
low power level 5, and it can not be added when reach
power limitation, unless you quit boost function by hand.
If you use boost function on central zone in Group b, it can quit automatically
and reduce power level when you add power level on the other zone and reach
power limitation.
EN-16
Using the Keep warm
Using the Keep warm to get stable temperatur
Keep warm is the function that one zone keep a lower power to make the
temperature stable.
e
1. Touch the slider of the heating zone that you wish to keep warm, then touch the
keep warm button ,
the cooking zone indicator will display “A”.
2.If you want to cancel the keep warm, touch the slider of the heating zone, then
touch the button , the heating zone will go back to “0” power stage.
Using the Pause function
Pause function can be used at any time during cooking. It allows to stop the
induction cooktop and come back to it.
1. Make sure the cook zone is working.
2. Touch the button Pause function, the cooking zone indicator will show “ll”.