P9
STEP 2: Remove the
exhaust lter cover from
your cleaner.
STEP 3:
Press the
exhaust lter release
latch and remove the
lter.
STEP 6:
Leave the lter
to dry for 24Hrs before
re-tting.
STEP 5: Clean the lter
using lukewarm water.
STEP 4:
Remove any
excess debris from the
lter.
To ret the exhaust lter to your cleaner, follow the above instructions in reverse.
STEP 1: Push upwards
the exhaust lter cover
release button.
Cleaning the exhaust lter
4. CLEANER MAINTENANCE
4.3 FILTERS
To ret the pre-motor lters to your cleaner, follow the above instructions in reverse.
Cleaning the pre-motor lters
STEP 2: Remove both
pre-motor lters from
the main product unit.
STEP 1:
Remove the dust
bin assembly from your
cleaner.
STEP 6:
Leave the lter
to dry for 24Hrs before
re-tting.
STEP 5:
Clean the lters
using lukewarm water.
STEP 3:
Remove any
excess debris from the
lters.
IMPORTANT: Do not ret the lters until they are completely dry.
IMPORTANT: for optimum performance, always keep your lters clean.
We recommend that the lters should be washed at least once a month.
To Next Page
Loading...
Need help?
General
