10
M-PWR
™
40V Battery & Charger (Sold Separately)
1
To charge the battery, slide battery
into charger. Push backward until
battery clicks into place and LED
Status Indicator is lit.
3
When charging, the fully lit LEDs
on the battery will indicate charge
level.
2
Charger LED Status Indicator will
turn green when battery is fully
charged.
4
To remove battery, press the
release button and slide battery
forward while holding down on
charger base.
NOTE: Batteries are shipped in a low charge condition to prevent possible problems. You should
charge them before first use.
Only one battery is charged at a time. When two batteries are in place, the battery with the most
power remaining will be charged first. This ensures the fastest time to full charge.
CHARGING AMBIENT TEMPERATURE RANGE:
5 °C – 50 °C (41 °F – 122 °F)
10%–33% Charged
0%–10% Charged
33%–66% Charged
66%–100% Charged
To Next Page
Loading...
Need help?
General
