10
Maintenance
Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center prior to continuing use.
Hoover
®
Total Home Pet vacuums should have regular maintenance checks to maintain optimal performance and suction.
Dirt Cup Release
Empty Dirt Cup
NOTICE: A Thermal Protector has been designed into your cleaner to protect it from overheating.
When the Thermal Protector activates, the cleaner will stop running. If this happens proceed as follows:
1. Turn the cleaner OFF and unplug it from the electrical outlet.
2. Empty the dirt cup.
3. Inspect the nozzle inlet, hose connector, hose, dirt cup inlet, cyclonic filter, rinsable filter and HEPA filter for any obstructions. Clear obstructions if
present.
4. When the cleaner is unplugged and the motor cools off for 30 minutes, the Thermal Protector will deactivate and cleaning may continue. If the
Thermal Protector continues to activate after following the above steps, your cleaner needs servicing. Refer to the Warranty section in the user
manual for servicing information.
WARNING
Do not use vacuum without dirt cup and dry filters.
WARNING
To reduce the risk of personal injury, unplug before cleaning or servicing.
Emptying the Dirt Cup
1. Remove the dirt cup by pressing the dirt cup release button.
2. Hold the dirt cup over your trash can and press the dirt cup trap door release to empty the dirt cup.
TIP: Empty the dirt cup after every use to maintain optimal performance.
To Next Page
Loading...
Need help?
General
