7
User Controls
Brush Roll ON/OFF Pedal.*
ON: Carpets
OFF: Hard Floors
To turn the Brush Roll ON/
OFF, step on the pedal.
Power the unit ON/OFF.*
1 2
*See page 8 for location of features.
Quick Release Cleaning Wand.*
Press the ‘Wand Release’ and pull out
of the vacuum for above floor cleaning.
3
4 Level Hight Adjustment Lever*
To adjust the height setting, turn the lever to the desired height setting.
For maximum cleaning performance, the following carpet height settings
are recommended:
-Hard floor setting: use for hard floors only
-Low and Medium setting: adjust depending on carpet type
-High carpet setting: for use on high pile carpets to ease pushing effort
4
• IMPORTANT•
If the vacuum is difficult to push, rotate the lever to the next higher setting.
IMPORTANT
Pedal is inactive when the cleaner is in the upright position.
CAUTION
Brush roll should be in OFF position for
cleaning of high pile carpet deeper than 1”.
To Next Page
Loading...
Need help?
General
