EasyManuals Logo

Hotpoint HD5G00KCB/UK User Manual

Hotpoint HD5G00KCB/UK
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
TURN OFF THE MAIN SWITCH AND ENSURE
THE COOKER IS COLD BEFORE CLEANING.
BEFORE SWITCHING ON AGAIN, ENSURE THAT
ALL CONTROLS ARE IN THE OFF POSITION.
Do not use steam cleaning
equipment.
Use protective gloves during all
operations.
Carry out the required
operations when the oven is cold.
Disconnect the appliance from
the power supply.
Do not use wire wool, abrasive
scourers or abrasive/corrosive
cleaning agents, as these could
damage the surfaces of the
appliance.
EXTERIOR SURFACES
Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Dry them with a dry cloth.
Do not use corrosive or abrasive detergents. If any of
these products inadvertently comes into contact with
the surfaces of the appliance, clean immediately with
a damp microfibre cloth.
INTERIOR SURFACES
After every use, leave the oven to cool and then
clean it, preferably while it is still warm, to remove any
deposits or stains caused by food residues To dry any
condensation that has formed as a result of cooking
foods with a high water content, let the oven to cool
completely and then wipe it with a cloth or sponge.
Clean the glass in the door with a suitable liquid
detergent.
CATALYTIC PANELS
(SOME MODELS ONLY)
Special catalytic panels facilitate the cleaning of the
cooking compartment thanks to their special self-
cleaning coating, which is highly porous and able to
absorb grease and grime.
Please note: Using corrosive or abrasive cleaning agents,
sti brushes, pan scourers or oven sprays could damage the
catalytic surface and compromise its self-cleaning properties.
Please contact our After-sales Service if you require
replacement panels.
ACCESSORIES
Soak the accessories in a washing-up liquid solution
after use, handling them with oven gloves if they
are still hot. Food residues can be removed using a
washing-up brush or a sponge.
REPLACING THE LIGHT
1.
Disconnect the oven from the power supply.
2.
Unscrew the cover from the light, replace the bulb
and screw the cover back on the light.
3. Reconnect the oven to the power supply.
Note: Use 25 W/230 V type E14
The bulb used in the product is specically designed for
domestic appliances and is not suitable for general room
lighting within the home (EC Regulation 244/2009).
Light bulbs are available from our After-sales Service.
- Do not handle bulbs with your bare hands as your
ngerprints could damage them. Do not use the oven until
the light cover has been retted.
Check the door seals around the oven periodically. If
the seals are damaged, please contact your nearest
Authorised After-sales Service Centre. We recommend
that the oven is not used until the seals have been
replaced.
INSPECTING THE OVEN SEALS
Care and maintenance
EN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hotpoint HD5G00KCB/UK and is the answer not in the manual?

Hotpoint HD5G00KCB/UK Specifications

General IconGeneral
Control typeButtons, Rotary
Product typeFreestanding cooker
Product colorBlack
Built-in displayNo
Control positionFront
Hob typeGas
Wok burnerYes
Cooking zone 1 power1900 W
Number of cooking zones4 zone(s)
Number of electric cooking zones0 zone(s)
Oven sizeMedium
Cleaning typeCatalytic (full)
Number of ovens2
Defrost function-
Number of shelves2 shelves
Oven net capacity66 L
Oven 2 sizeSmall
Oven 2 positionTop
Oven 2 net capacity32 L
Oven 2 power sourceElectric
Oven 2 number of shelves1 shelves
Energy consumption (conventional)1.37 kWh
Weight and Dimensions IconWeight and Dimensions
Depth600 mm
Width500 mm
Height900 mm

Related product manuals