10
After connecting your appliance or after an extended power outage, 12:00 flashes on the display.
To set the time Display
Press the +/- buttons to set the time, e.g 6:30.
Confirm by pressing the CLOCK button.
There is a beep to confirm that the time has been set.
To change the time Display
Press the clock button. The time display will flash.
Enter the new time (e.g. 7:30)
using the +/- buttons.
Confirm by pressing the CLOCK button.
There is a beep to confirm that the new time has been
set.
Comments:
If you do not press the clock button, the time displayed is automatically saved after 10 seconds.
If you think that there is not enough space for it to rotate freely in the oven, select the turntable stop
function before or during the programme.
N.B.: the turntable cannot be stopped during an auto defrost programme.
To activate this option:
Press the buttons at the same time and
hold for 2 seconds. The symbol goes out and the
turntable stops rotating.
To cancel:
To cancel this function, repeat the same procedure.
You must turn the cookware and stir its contents half
way through the programme if the TURNTABLE
STOP FUNCTION is used.
Setting/changing the time
Stopping the turntable
Use
To Next Page
Loading...
Need help?
General
