12
PPrrooggrraammmmiinngg bbyy ppoowweerr lleevveell DDiissppllaayy
Use the selection keys to choose the microwave
function. The maximum power level (1,000
W) flashes on the display.
Press the button if you want to reduce the microwave
power level, e.g. to 500 W. Confirm the power level by
pressing the °C/W button. The clock digits will start
flashing on the display.
Press the button to set the required programme time,
e.g. 10 minutes.
Confirm by pressing START. The oven lights up and the
programme starts.
CCoommmmeennttss::
If the door is opened during cooking, the oven stops and the remaining programme time is
displayed. To finish the programme, just reclose the door and press START.
The programme time can be changed at any time simply by pressing the clock button followed
by the +/- buttons.
Microwave function
Express programme
EExxpprreessss pprrooggrraammmmee DDiissppllaayy
Press the + button to set an express 30-second
programme. The microwave displays its maximum power
(1,000 W).
Press START to start the programme.
You can set an express programme for up to 2 minutes.
Each time you press the + button, 30 seconds is added to
the programme time. Press the button 4 times to set the
maximum time of 2 minutes.
Heating and “heat & hold”
Heating and “heat & hold” Display
If you leave your dish in the oven at the end of a microwave
programme without opening the door, a function called
“heat and hold” starts after 2 minutes to keep your dish
warm. Three beeps sound after 15 minutes to let you know
the “heat & hold” programme has finished.
Use
To Next Page
Loading...
Need help?
General
