Battery
Description Spare part number
Battery, 4600-mAhr, Li-ion, (includes cable) 739002-001
Before removing the battery, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
Back cover on page 12).
WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of
information. To prevent loss of information, save your work or shut down the tablet through Windows
before removing the battery.
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Release the zero insertion force (ZIF) connector (2) to which the display panel cable is connected,
and then disconnect the display panel cable from the system board.
3. Release the ZIF connector (3) to which the I/O board cable is connected, and then disconnect the
I/O board cable from the system board.
4. Remove the six Phillips PM2.0×2.75 screws (1) that secure the battery to the display
panel assembly.
5. Lift the front edge of the battery (2) until it rests at an angle.
14 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
Need help?
General