24 HP MediaSmart HDTV User Guide
Using the First-Time
Setup Wizard
Initial TV Setup
When you turn on the TV for the first time, a first-time
Setup Wizard guides you through the following tasks:
■ Setting the onscreen display language.
■ Setting the clock mode (if manual, enter the time
zone, date, and time).
■ Selecting a signal source.
■ Searching the TV signal source (antenna or cable)
and memorizing the available TV channels. (Wait
while the channel search operation automatically
searches for a signal from all available channels
on the ANT/Cable connector).
You can start the Setup Wizard by using the Setup
menu in the onscreen display; see “Starting the Setup
Wizard” on page 64.
Preparing
Complete the following steps before you press the
Power button on the remote control:
1 Insert the batteries into the remote control.
2 Connect the signal source antenna or cable to
the TV.
3 Plug in the AC power cord into the AC outlet.
4 Turn on the TV.
Selecting or entering items during Initial
TV Setup
Press the Arrow buttons on the remote control to select
the desired item, and then press the OK button.
Next steps
This completes the initial TV setup.
To prepare the TV for using digital media (the Media
button on the remote control), continue with “Setting
Up the TV for Digital Media” on page 25.
n
To view high-definition programming, you
must have connected to the TV a
high-definition signal source, such as an
off-the-air high-definition antenna or cable
HD signal, a cable or satellite provider HD
set-top box, or an HD-DVD player. All
sources, except an HD antenna or cable HD
signal, must connect to one of the High
Definition Input connector sets on the TV.
You may view high-definition digital media
through your home network.
To Next Page
Loading...
Need help?
General
