Rubber feet
Description Spare part number
Rubber feet for use in black and green models 926889-001
Rubber feet for use in black and white models 926890-001
Before removing the rubber feet, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
To remove the rubber feet:
▲
Peel the lower rubber feet (1) and upper rubber feet (2) from the bottom of the computer.
NOTE: The lower feet and upper feet are dierent sizes.
Reverse this procedure to install the rubber feet.
34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
Need help?
General
