HP 245 G4 User Manual

Optical drive
NOTE: Optical drive spare part kits include bracket and bezel.
Description Spare part number
DVD+/-RW Double-Layer SuperMulti Drive for use in HP Notebook models (includes bracket and bezel) 813514-001
DVD+/-RW Double-Layer SuperMulti Drive for use in HP 245 G4 Notebook models (includes bracket and
bezel)
818147-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 30).
To remove the optical drive:
1. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
2. Remove the optical drive (2) by sliding it out of the optical drive bay.
Reverse this procedure to reassemble and install the optical drive.
Component replacement procedures 31

HP 245 G4 Specifications

General

Storage	128GB SSD
Display	1366 x 768
Graphics	AMD Radeon R4 Graphics
Operating System	Windows 10 Home
Battery	41 Wh Li-ion
Wireless	802.11b/g/n
Ports	2 x USB 2.0, 1 x HDMI, 1 x RJ-45, 1 x headphone/microphone combo