HP 260 G2 DM User Manual

Removing the computer access panel
To access internal components, you must remove the access panel:
1. Remove/disengage any security devices that prohibit opening the computer.
2. Remove all removable media, such as a USB ash drive, from the computer.
3. Turn o the computer properly through the operating system, and turn o any external devices.
4. Disconnect the power cord from the AC outlet and disconnect any external devices.
IMPORTANT: Regardless of the power-on state, voltage is always present on the system board as long
as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage
to the internal components of the computer.
5. If the computer is on a stand, remove the computer from the stand.
6. Remove the screw on the rear of the computer (1), and then slide the panel forward and lift if o the
computer (2).
6 Chapter 2 Hardware upgrades

HP 260 G2 DM Specifications

General

Brand	HP
Model	260 G2 DM
Category	Desktop
Language	English