Model 410C
TM 11-6625-1614-15
1-4. ACCESORIES AVAILABLE .
1-5. MODEL 11036A AC PROBE.
This accessory, when used with the
Model 410C, permits AC voltage measurements from 0.5 volt rms
to 300 volts rms, full scale over a frequency range of 20 cps to
700 Mc.
Reference calibration accuracy at 400 cps (sinusoidal)
is ±3% of full scale.
Frequency response is ±10% from 20 cps to
700 Mc, with indications obtainable to 3000 Mc. Frequency
response at 100 Mc is within ±2%. The Model 110364 responds to
the positive-peak-above-average value of the signal applied. The
Model 410C is calibrated to read in RMS volts, for sine wave
inputs .
1-5
To Next Page
Loading...
Need help?
General
