3-Using playback and the main menu 29
Using playback and
the main menu
Using playback to view images
After you have taken some pictures or video clips and they are
stored in the camera, you can view them in Playback mode.
1 Press the OK button to activate Playback mode. The most
recently taken or viewed image appears on the Image
Display. If the image is a video clip, it begins playing
automatically within a few seconds.
2 Scroll through the images by using the Arrow buttons.
Press and hold or to scroll automatically. If a video
clip is playing, pressing the button will reset the clip to
the first frame of the video clip.
In addition to seeing the images on the Image Display, some
information about each image is also displayed above and
below the image. The following table describes the information
that may be viewed for each image.
3
To Next Page
Loading...
Need help?
General
