EasyManuals Logo

HP aruba 6300M User Manual

HP aruba 6300M
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
| 4
Only Aruba-approved power cords may be used with Aruba devices. To access the power cord
information for your switch, see the latest edition of the Installation and Getting Started Guide for your
switch and power supply. Lost or damaged power cords must be replaced only with Aruba-approved
power cords. If your installation requires a different power cord than the one supplied with the switch
and/or power supply, be sure that the cord is adequately sized for the current requirements of the switch.
In addition, be sure to use a power cord displaying the mark of the safety agency that defines the
regulations for power cords in your country/region. The mark is your assurance that the power cord can
be used safely with the switch and power supply.
Do not use a damaged or non-recommended power cord with your switch. Using such power cords voids the
switch and power supply warranty. It can also cause serious electrical problems, including injury or death to
personnel, and damage to the switch and other property. If you cannot verify that you have a power cord approved
for use with your switch model, contact your authorized Aruba dealer or sales representative for assistance.
Remove the power cord from the switch before mounting or dismounting the switch.
Environmental specifications
Aruba 6300M (JL658A, JL659A,
JL660A, JL661A, JL662A, JL663A,
JL664A, JL762A, R8S89A, R8S90A,
R8S91A, R8S92A)
Aruba 6300F (JL665A, JL666A,
JL667A, JL668A)
Operating
temperature
32°F to 113°F (0°C to 45°C) up to 5000 ft
derate -1°C for every 1000 ft from 5000 ft
to 10000 ft
32°F to 113°F (0°C to 45°C) up to 5000 ft
derate -1°C for every 1000 ft from 5000 ft
to 10000 ft
Operating relative
humidity
15% to 95% @ 104°F (40°C) non-
condensing
15% to 95% @ 104°F (40°C) non-
condensing
Non-operating
temperature
-40°F to 158°F (-40°C to 70°C) up to 15000
ft
-40°F to 158°F (-40°C to 70°C) up to 15000
ft
Non-operating
storage relative
humidity
15% to 90% @ 149°F (65°C) non-
condensing
15% to 90% @ 149°F (65°C) non-
condensing
Max operating
altitude
10000 feet (3 km) Max 10000 feet (3 km) Max
Table 1: Environmental Specifications for all 6300F/M Switch Models

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP aruba 6300M and is the answer not in the manual?

HP aruba 6300M Specifications

General IconGeneral
ModelAruba 6300M
ManagementAruba Central, CLI, Web GUI, SNMP
LayerLayer 2 and Layer 3
Operating Temperature0°C to 45°C
Input Voltage100-240 VAC
Switching Capacity880 Gbps
Power SupplyRedundant power supply options
StackingUp to 10 switches
PoEUp to 60W per port
MAC Address Table Size32, 768 entries
Jumbo Frame SupportYes
Layer 3 FeaturesStatic routing, RIP, OSPF, BGP
Security FeaturesAccess Control Lists (ACLs), port security, MACsec
Power ConsumptionVaries by model and configuration
Ports24 or 48 10/100/1000BASE-T ports, 4 or 8 SFP+ ports

Related product manuals