3. Taking Photos
This camera is designed to make the experience of taking photos simple and quick. It’s
Auto mode feature will optimise the internal settings so that in most situations, it can take
photos with ease. This camera also has additional modes and features that extend the
capabilities for the more experienced user.
Power on the camera by pressing the 1. Power button
.
Frame the shot using the focus bracket on the LCD monitor.2.
Lightly pressing the 3. Shutter button down to the halfway position will start
the automatic focus and adjustments to the exposure level. When the camera has
successfully completed this automatic routine, the focus bracket will turn green. If the
automatic focus and exposure routine is not successful, the bracket will turn red. If this
occurs, simply release the shutter and repeat this step until the bracket turns green. In
some situations, lighting and contrast may be insufficient for the camera to successfully
complete the auto focus and exposure level routine. If this occurs, try better lighting.
Pressing the4. Shutter button
down fully will take the photo. If you take the
photo when the bracket is red, the focus and exposure may not be correct.
If the shake warning icon appears, hold the camera steadily, with your arms at your
side or use a tripod to stabilize the camera to reduce the risk of blurred photos.
To Next Page
Loading...
Need help?
General
