HP Compaq 4000 Pro series User Manual

HP 22-n-1 Media Card Reader
USB Interface
USB 2.0 High-speed interface
Note:
Requires the USB cable to be connected to the internal USB 2.0 port or a USB 2.0 PCI card.
1394 Interface
Two IEEE-1394a external ports; 1 IEEE-1394a internal port (connects to the pass through cable on
the media card reader)
Advance protocol support
Supports hardware ECC (Error Correction Code) function
Supports hardware CRC (Cyclic Redundancy Check) function
Supports MS 4-bit parallel transfer mode
Supports MS-PRO 4-bit parallel transfer mode
Supports MS PRO-HG Duo 4-bit parallel transfer mode
Supports SD 4-bit parallel transfer mode
Supports high-speed 50Mhz SD 4-bit card (version 2.0)
Supports high-speed 52Mhz MultiMediaCard 8-bit card (version 4.2)
Supports CF v4.0 with PIO mode 6 and Ultra DMA mode
Supported media type
CompactFlash Type I
CompactFlash Type II
Microdrive
MultiMediaCard
Reduced Size MultiMediaCard (RS MultiMediaCard)
MultiMediaCard 4.2 (MultiMediaCard Plus, including MultiMediaCard Plus HC)
Reduced Size MultiMediaCard 4.2 (MultiMediaCard Mobile, including MultiMediaCard Mobile HC)
Secure Digital Card (SD)
Secure Digital High Capacity (SDHC)
miniSD
miniSD High Capacity
Micro SD (T-Flash)
Micro SD HC
Memory Stick
Memory Stick Select
Memory Stick Duo (MS Duo)
QuickSpecs
HP Compaq 4000 Pro Series
Technical Specifications - Removable Storage
DA - 13860 North America — Version 14 — August 14, 2013 Page 55

HP Compaq 4000 Pro series Specifications

General

Brand	HP
Model	Compaq 4000 Pro series
Category	Desktop
Language	English