HP Compaq dc7100 CMT User Manual

Technical Reference Guide 361834-001 5-13
Input/Output Interfaces
The serial interface configuration registers are listed in the following table:
Serial Interface Control
The BIOS function INT 14 provides basic control of the serial interface. The serial interface can
be directly controlled by software through the I/O-mapped registers listed in Table 5-12.
Table 5-11.
Serial Interface Configuration Registers
Index Address Function R/W
30h Activate R/W
60h Base Address MSB R/W
61h Base Address LSB R/W
70h Interrupt Select R/W
F0h Mode Register R/W
Table 5-12.
Serial Interface Control Registers
COM1
Addr.
COM2
Addr. Register R/W
3F8h 2F8h Receive Data Buffer
Transmit Data Buffer
Baud Rate Divisor Register 0 (when bit 7 of Line Control Reg. Is set)
R
W
W
3F9h 2F9h Baud Rate Divisor Register 1 (when bit 7 of Line Control Reg. Is set)
Interrupt Enable Register
W
R/W
3FAh 2FAh Interrupt ID Register
FIFO Control Register
R
W
3FBh 2FBh Line Control Register R/W
3FCh 2FCh Modem Control Register R/W
3FDh 2FDh Line Status Register R
3FEh 2FEh Modem Status R

HP Compaq dc7100 CMT Specifications

General

Brand	HP
Model	Compaq dc7100 CMT
Category	Desktop
Language	English