HP Compaq dc7600 MT Technical Reference Guide

Technical Reference Guide www.hp.com 2-25
System Overview
2.5 Specifications
This section includes the environmental, electrical, and physical specifications for the systems
covered in this guide. Where provided, metric statistics are given in parenthesis. Specifications
are subject to change without notice.
NOTE:
[1] Peak input acceleration during an 11 ms half-sine shock pulse.
[2] Maximum rate of change: 1500 ft/min.
.
Table 2-7
Environmental Specifications (Factory Configuration)
Parameter Operating Non-operating
Ambient Air Temperature 50
o
to 95
o
F (10
o
to 35
o
C, max.
rate of change <
10°C/Hr)
-24
o
to 140
o
F (-30
o
to 60
o
C, max.
rate of change <
20°C/Hr )
Shock (w/o damage) 5 Gs [1] 20 Gs [1]
Vibration 0.000215 G
2
/Hz, 10-300 Hz 0.0005 G
2
/Hz, 10-500 Hz
Humidity 10-90% Rh @ 28
o
C max.
wet bulb temperature
5-95% Rh @ 38.7
o
C max.
wet bulb temperature
Maximum Altitude 10,000 ft (3048 m) [2] 30,000 ft (9144 m) [2]
Table 2-8
Electrical Specifications
Parameter U.S. International
Input Line Voltage:
Nominal:
Maximum:
100–240 VAC
90–264 VAC
100–240 VAC
90–264 VAC
Input Line Frequency Range:
Nominal:
Maximum:
50–60 Hz
47–63 Hz
50–60 Hz
47–63 Hz
Power Supply:
Maximum Continuous Power:
USDT
ST or SFF
MT
CMT
Maximum Line Current Draw:
USDT
SF or SFF
MT
CMT
200 watts
240 watts
300 watts
365 watts
4 A @ 100 VAC
5 A @ 100 VAC
5.4 A @ 100 VAC
6 A @ 100 VAC
200 watts
240 watts
300 watts
365 watts
2 A @ 200 VAC
2.5 A @ 200 VAC
2.7 A @ 200 VAC
3.0 A @ 200 VAC

HP Compaq dc7600 MT Specifications

General

Brand	HP
Model	Compaq dc7600 MT
Category	Desktop
Language	English