HP Compaq Mini CQ10 Maintenance And Service Guide

5.
Remove the system board (4) by sliding it up and to the right at an angle.
NOTE: If it is necessary to replace the power connector cable, turn the system board upside
down with the rear toward you, and then disconnect the power connector cable from the
system board. The power connector cable is available using spare part number 656095-001.
Reverse this procedure to install the system board and the power connector cable.
76 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals

HP Compaq Mini CQ10 Specifications

General

Brand	HP
Model	Compaq Mini CQ10
Category	Laptop
Language	English