Specifications
Hardware and Software Guide A–2
Rated Input Power
The power information in this section might be helpful if you
plan to travel internationally with the notebook.
The notebook operates on DC power, which can be supplied by
an AC or a DC power source. Although the notebook can be
powered from a stand-alone DC power source, it is strongly
recommended that the notebook be powered only with an
AC
adapter or DC power cord supplied or approved by HP.
The notebook is capable of accepting DC power within the
following specifications:
This product is designed for IT power systems in Norway with
phase-to-phase voltage not exceeding 240 Vrms.
Input Power Rating
Operating voltage 18.5 V dc @ 3.5 A - 65 W
Operating current 3.5 A
To Next Page
Loading...
Need help?
General