EasyManuals Logo
Home>HP>Laptop>Compaq nx6310

HP Compaq nx6310 Install Guide

HP Compaq nx6310
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
10) Save the file and exit notepad.
11) Open any other .sif file(s) in the path:
RemoteInstall\Setup\<Language>\Images\<Dir_name>\i386\xxxx.sif with
notepad
12) In these files, under the section [Unattended], add the following lines:
OemPreinstall=yes
OemPnPDriversPath=drivers\sata
DriverSigningPolicy = Ignore
13) Save all your edited .sif file(s), and close notepad
14) Restart the Remote Installation Service (binlsvc).
Adding SATA Drivers to an Installation CD
Where these guidelines are applicable
IMPORTANT:
Follow the installation instructions in the order provided. Failure to
complete these steps in the proper order can result in an unsuccessful or
unstable installation.
This section provides guidelines for customers who need to add SATA support by creating a custom
Windows XP Service Pack 2 Installation CD.
Steps to add SATA drivers to the CD
1) Copy all the directories and files from the Windows XP CD to a temporary folder (these
guidelines will use c:\xpcd)
2) Download the Intel SATA AHCI Controller Driver, SoftPaq SP32478.exe, from www.hp.com.
3) Extract all the files from the SoftPaq. A USB floppy is necessary for this step. Run sp32478;
this will create a floppy disk. The files will be located on this floppy.
4) These files should be located on the floppy disk.
a. iaahci.cat
b. iaahci.inf
c. iastor.cat
d. iastor.inf
e. iastor.sys
f. license.txt
g. readme.txt
h. txtsetup.oem
5) Create the following path in the temporary folder: c:\xpcd\$oem$\$1\drivers\sata
6) Copy all the files from step 4 to the c:\xpcd\i386 folder.
7) Also copy all the files from step 4 to the c:\xpcd\$oem$\$1\drivers\sata folder.
6

Other manuals for HP Compaq nx6310

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq nx6310 and is the answer not in the manual?

HP Compaq nx6310 Specifications

General IconGeneral
Display diagonal15 \
Display resolution1024 x 768 pixels
Native aspect ratio4:3
HDD speed5400 RPM
HDD interfaceSATA
Optical drive typeDVD±RW
Total storage capacity60 GB
BluetoothNo
Networking featuresEthernet/Fast Ethernet
AC adapter power65 W
Audio systemIntel High Definition Audio
Cache external1 KB
Processor cache1 MB
Processor familyIntel® Celeron® M
Processor frequency1.46 GHz
Processor cache typeL2
Processor manufacturerIntel
Processor front side bus533 MHz
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 35 °C
Operating relative humidity (H-H)10 - 90 %
Non-operating relative humidity (non-condensing)5 - 95 %
Bundled softwareMicrosoft Windows Media Player 10
Operating system installedWindows XP Home Edition
Discrete graphics cardYes
Discrete graphics card modelIntel® GMA 950
Maximum graphics card memory0.128 GB
Motherboard chipsetIntel® 945GM Express
Memory slots2x SO-DIMM
Internal memory0.5 GB
Internal memory typeDDR2-SDRAM
Maximum internal memory2 GB
Modem speed56 Kbit/s
Dimensions (WxDxH)329 x 267 x 30 mm
Wireless technologyIEEE 802.11b/g
Keyboard layoutQWERTY
Pointing deviceTouchpad
Cable lock slot typeKensington
Number of battery cells6
Charging port typeDC-in jack
Serial ports quantity0
USB 2.0 ports quantity2
CardBus PCMCIA slot typeType II
Country of originChina
Weight and Dimensions IconWeight and Dimensions
Depth267 mm
Width329 mm
Height30 mm
Weight2700 g

Related product manuals