HP DL385 - ProLiant - G5 User Manual

Component identification 8
Front panel LEDs and buttons
Item Description Status
1 UID LED button Blue = Activated
Flashing = System being remotely managed
Off = Deactivated
2 Internal health LED Green = Normal
Amber = System degraded. To identify component in degraded
state, refer to Systems Insight Display LEDs.
Red = System critical. To identify component in critical state, refer
to Systems Insight Display LEDs.
3 External health LED (power
supply)
Green = Normal
Amber = Power redundancy failure. To identify component in
degraded state, refer to Systems Insight Display LEDs.
Red = Critical power supply failure. To identify component in
critical state, refer to Systems Insight Display LEDs.
4 NIC 1 link/activity LED Green = Network link
Flashing = Network link and activity
Off = No link to network. If power is off, view the rear panel
RJ45 LEDs for status.
5 NIC 2 link/activity LED Green = Network link
Flashing = Network link and activity
Off = No link to network. If power is off, view the rear panel
RJ45 LEDs for status.
6 Power On/Standby
button/system power LED
Green = System on
Amber = System shut down, but power still applied
Off = Power cord not attached or power supply failure

HP DL385 - ProLiant - G5 Specifications

General

Processor	AMD Opteron
Processor Socket	Socket F (1207)
Maximum Processors	2
Memory Slots	16
Maximum Memory	128 GB
Form Factor	2U Rack
Product Line	ProLiant
Model	DL385 G5
Hard Drive Interface	SAS/SATA
Memory Type	DDR2
Storage	SAS/SATA
Drive Bays	8
RAID Levels	RAID 0, 1, 5
Network	Embedded NC373i Multifunction Gigabit Network Adapter
Network Controller	HP NC373i
Expansion Slots	6
Power Supply	Hot-plug redundant power supplies
Operating System Support	Windows Server, Linux, VMware
Server Type	Rack