HP dx2310 - Microtower PC User Manual

Service Reference Guide 490778-001 6–3
Removal and Replacement Procedures— Microtower (MT) Chassis
6.2.2 Front Bezel (MT Chassis)
1. Prepare the computer for disassembly (Section 6.1, “Preparation for Disassembly”).
2. Remove the access panel (Section 6.2.1, “Access Panel (MT Chassis)”).
3. Press outward on the three latches on the right side of the bezel 1, then rotate the right side
of the bezel off the chassis 2 followed by the left side.
4. Continue to rotate the bezel, then push the bezel to the bottom to release the top latches from
chassis.
To reinstall the front bezel, reverse the removal procedure.
5. Insert the three hooks on the left side of the bezel into the slots on the chassis and rotate the
bezel on from left to right 1 so that it snaps in place.
* These apply for selected models and countries only.
*
*
* These apply for selected models and countries only.

HP dx2310 - Microtower PC Specifications

General

Brand	HP
Model	dx2310 - Microtower PC
Category	Desktop
Language	English