1
Preparing for installation
The MSR3000 Routers include the models in Table 1.
Table 1 HPE MSR3000 Routers models
Router model Product code HPE description RMN
MSR3064 JG404A HPE MSR3064 Router BJNGA-BB0006
MSR3044 JG405A HPE MSR3044 Router BJNGA-BB0011
MSR3024 JG406A HPE MSR3024 AC Router BJNGA-BB0007
MSR3024 JG407A HPE MSR3024 DC Router BJNGA-BB0007
MSR3024 JG408A HPE MSR3024 PoE Router BJNGA-BB0007
MSR3012 JG409A HPE MSR3012 AC Router BJNGA-BB0008
MSR3012 JG409B HPE MSR3012 AC Router BJNGA-BB0008
MSR3012 JG410A HPE MSR3012 DC Router BJNGA-BB0008
IMPORTANT:
For regulatory identification purposes, every MSR3000 router is assigned a regulatory model
number (RMN). These regulatory model numbers should not be confused with the marketing name
HPE MSR30XX or the product codes.
Safety recommendations
Safety symbols
When reading this document, note the following symbols:
WARNING means an alert that calls attention to important information that if not understood or
followed can result in personal injury.
CAUTION means an alert that calls attention to important information that if not understood or
followed can result in data loss, data corruption, or damage to hardware or software.
General safety recommendations
• Keep the chassis and installation tools away from walk areas.
• Make sure the ground is dry and flat and anti-slip measures are in place.
• Remove all the external cables (including power cords) before moving the chassis.
Electricity safety
• Locate the emergency power-off switch in the room before installation. Shut the power off at
once in case accident occurs. Disconnect the power cord of the router if necessary.
• Make sure the router is correctly grounded.
• Do not open or close the chassis cover when the router is powered on.
To Next Page
Loading...
Need help?
General
