HP HPE FlexFabric 5901 Series User Manual

12
Figure 7 Connecting the grounding cable to the chassis
(1) Grounding screw
(2) Ring terminal
(3) Grounding sign
(4) Grounding hole
(5) Grounding cable
3. Verify that the grounding cable has been securely connected to the rear grounding point.
Connecting the grounding cable to a grounding strip
1. Use needle-nose pliers to bend the bare metal part to the shape as shown in Figure 8. Make
sure the bended part can securely attached to the grounding post on the grounding strip.
2. Attach the bended part of the grounding cable to the grounding post and use the hex nut to
fasten the bended part to the post.
Figure 8 Connecting the grounding cable to the grounding strip
(1) Grounding post
(2) Grounding strip
(3) Grounding cable
(4) Hex nut
1
2
4
5
3
1 2
34

HP HPE FlexFabric 5901 Series Specifications

General

Brand	HP
Model	HPE FlexFabric 5901 Series
Category	Switch
Language	English