To Next Page

To Previous Page

NOTE: A 1 metre SAS cable is supplied with the product. 0.5 metre and 2 metre cables may

also be purchased. Cables over 2 metres are not supported.

Figure 6 HPE 5100 Capacity Upgrade System components

Backplane2Drive cage1

Airguard4Interface between fan and backplane3

Power supply6Voltage Regulator (VRM) or power module5

I/O module8Enclosure7

Rear unit ID10Fan module9

Disk drive11

Optional Hardware Components

All Optional Hardware PCIe cards and SFP transceivers that support connection to a 10GbE

network and/or a FC SAN can be swapped like for like. The following table lists the part numbers

for HPE StoreOnce Optional Hardware. Optional Hardware is supported with the HPE StoreOnce

5100 System and HPE StoreOnce 3500 Series. It is not supported with the HPE StoreOnce 3100

System.

Table 6 Optional Hardware Part Numbers

Hot plug?Part numberPartDescription

No657128-001SPS-BD ETHERNET 10GB

2P 530T ADPTR

10GbE-T network card

No792834-001SPS-PCA Ethernet 10Gb

2P 557 SFP-ADPTR

10GbE SFP network card

Yes456096-001SPS-SFP+,10G BLc,SR10GbE SFP transceiver

No489191-001SPS-BD, HBA, 82q DP FC

PCIe

8Gb FC card

Yes468508-001SPS-SFP, 8GB, FC SHORT

WAVE

8Gb FC transceiver

14 Finding part numbers for replacement parts

HP HPE StoreOnce 5100 Series User Manual

Questions and Answers: