1–22 Reference Guide
Using Your hp iPAQ h2200 Series
DRAFT - Revised 10/16/02
hp CONFIDENTIAL 12/3/02
File: ch1-UsingtheH2200.fm PN: 293146-001
the main battery without losing RAM data as long as it is replaced
within 10 minutes. If the battery is removed from the unit for
longer than 10 minutes, you will lose unsaved RAM data and
need to reset the unit.
✎
Before removing the battery, be sure to save or backup any
unsaved data.
Preserving Battery Time
Adjusting the Standby Setting
Adjusting the Standby setting can preserve battery time. During
Standby, the unit turns off so very little power is being consumed.
This helps to preserve programs and data stored in RAM.
■ Lower Standby Period—Increases the usable battery time. If
you use the h2200 Pocket PC for extended periods of time, it
is recommended that you select a lower Standby Period.
■ Higher Standby Period—Decreases the usable battery time
and allocates it for standby usage. If you leave your h2200
Pocket PC off for extended periods of time without
recharging it, it is recommended that you select a higher
Standby Period.
For more information on using the Standby setting, tap Help from
the Start menu.
To adjust the Standby setting:
1. From the Start menu, tap Settings.
To Next Page
Loading...
Need help?
General
