1-1
Introducing the Switch
1
Introducing the Switch
The ProCurve Series 2600 Switches are multiport switches that can be used
to build high-performance switched workgroup networks. These switches are
store-and-forward devices that offer low latency for high-speed networking.
The 2600-PWR Switches also support Redundant Power Supply and Power
over Ethernet (PoE) technologies.
Throughout this manual, these switches will be referred to as the Series 2600
Switches and the Series 2600-PWR Switches.
ProCurve Switch 2650 (J4899B)
ProCurve Switch 2626 (J4900B)
LED
Mode
Clear
Reset
Spd mode: off = 10 Mbps,
flash = 100 Mbps, on = 1000 Mbps
PoE-Ready 10/100Base-TX Ports (1 - 48)
Gig-T
Port s
Mini-
GBIC
Port s
1
11 23
12
24
26
25
36
47
48
M
M
Power
Fault
hp procurve
switch
2650-PWR
J8165A
PoE
Act
FDx
(all 10/100Base-TX ports are HP Auto-MDIX, Gig-T ports are IEEE Auto MDI/MDI-X)
Link|Mode
Test
RPS
EPS
Fan
50
Status
Spd
2
2 4 6 810
12
14 16 18
20
22
24
26
28 30 32 34 36 38 40 42 44
1 3 5 7911
13
15 17 19 21 23 25 27 29 31 33 35 37 39 41 43
49
47
48
45
46
13
14
35 37
38
!
Use only one (T or M) for each Gigabit port
PoE
ProCurve Switch 2650-PWR (J8165A)
PoE
Power
Fault
Dual-Personality Port:
10/100/1000-T (T) or Mini-GBIC (M)
(Port 9T is IEEE Auto MDI/MDIX)
Status
Reset
Clear
Console
PoE-Integrated 10/100-TX Ports (1 - 8)
(Ports are HP Auto-MDIX)
ProCurve
Switch
2600-PWR
J8762A
*
Spd mode: off = 10 Mbps, flash = 100 Mbps, on = 1000 Mbps
Link
Mode
LED
Mode
Spd
Act
FDx
Tes t
EPS
Fan
2
3
4
Link Mode
1
Link
Mode
5
6
7
8
9T
Link
Mode
PoE
*
9M
!
Use only one (T or M) for Port 9
RPS
!
Use only one (T or M) for each Gigabit port
Clear
Reset
Spd mode: off = 10 Mbps,
flash = 100 Mbps, on = 1000 Mbps
PoE-Ready 10/100Base-TX Ports (1 - 24)
Gig-T
Port s
Mini-
GBIC
Port s
1
24
M
M
Power
Fault
PoE
Act
FDx
(all 10/100Base-TX ports are HP Auto-MDIX, Gig-T ports are IEEE Auto MDI/MDI-X)
Link|Mode
Test
RPS
EPS
Fan
26
Status
1 3
5
7
9 11
13
15
17 19
2 4 6
8
10 12
14 16 18 20
25
23
24
21
22
2 12
231311
14
Spd
hp procurve
switch
2626-PWR
J8164A
LED
Mode
PoE
ProCurve Switch 2626-PWR (J8164A)
ProCurve Switch 2600-8-PWR with Gigabit Uplink (J8762A)