Install
the HP Jetdirect 200m and 250m print servers
There are two parts to installing the print server: hardware installation and software installation. We
recommend strongly that you install the hardware first.
Installing the hardware
The basic steps in the hardware installation are:
1. Set up the printer.
2. Plug in the print server.
3. Plug in the network cable.
Click here for detailed hardware installation instructions.
Installing the software
Software installation for network printing includes:
● installing the printer driver on your computer
● establishing the print path between your computer and the network printer
The simplest way to install the software is to use the software CD that came with your printer. That CD
contains all the software you need for a successful network printer installation, including the printer
driver.
Click here for instructions on using this software.
The software on the printer's CD handles installation for Windows and MacOS systems. Alternative
software allows installation on other operating systems, as well as configuration and management of
network printing. The Software Solutions Summary in the HP Jetdirect Administrator's Guide
summarizes the available software, and provides pointers to additional information. (The HP Install
Network Printer Wizard, described in the solutions summary, is the same software that comes on the
printer's CD.)
To Next Page
Loading...
Need help?
General
