1-6
Introducing the Switch
Switch Features
Switch Features
The features of the switches include:
■ 8, 16, or 24 auto-sensing 10/100Base-TX RJ-45 ports with Auto-MDIX.
■ The V1410-24-2G Switch includes 24 auto-sensing 10/100Base-TX RJ-45
ports and two auto-sensing 10/100/1000Base-T RJ-45 ports, all with
Auto-MDIX.
■ Plug-and-play networking—all ports are enabled—just connect the
network cables to active network devices and your switched network is
operational.
■ Auto-MDIX on all twisted-pair ports, meaning that all twisted-pair
connections can be made using straight-through cables. Cross-over cables
are not required, although they will also work.
■ Automatically negotiated full-duplex operation for the RJ-45 ports when
connected to other auto-negotiating devices.
■ The 16- and 24-port models support new IEEE 802.3az features in the
100 Mbps mode. This new Energy Efficient Ethernet (EEE) standard
reduces power consumption when connected with EEE-compliant client
devices.
■ Automatic learning of the hardware addresses in each switch’s 8000-
address forwarding table (1040-addresses for the V1410-8 Switch).
■ The V1410-16 Switch and V1410-24 Switch include support for up to 2048-
byte Jumbo frame size to improve performance of large data transfers.
■ Support for IEEE 802.1p prioritization Quality of Service (QoS) to deliver
data to devices based on the priority and type of traffic.
■ Fanless designed enables quiet operation for deployment in open spaces.
To Next Page
Need help?
General
