HP Latex R Series User Manual

The above illustrations may also help you to install the alignment-bar extenders when using the edge
holders in multi-sheet printing.
NOTE: The complete set of these features will be available by the end of 2018.
9. Load the substrate between the edge holders, leaving a 10 mm (0.39 in) space between the substrate and
each edge holder.
You can now load and print as usual.
Uninstall the edge holders
1. In the Internal Print Server, tap Topmost in the Scan Beam menu. This moves the scan-axis beam and the
curing module to their highest positions.
ENWW Uninstall the edge holders 15

HP Latex R Series Specifications

General

Brand	HP
Model	Latex R Series
Category	Printer Accessories
Language	English