Hard drive
Description Spare part number
Hard drive:
320-GB, 7200-rpm 627731-001
250-GB, 7200-rpm 635225-001
160-GB, 7200-rpm 635760-001
Hard Drive Hardware Kit (includes hard drive bracket, screws, and Mylar cover) 633491-001
Hard Drive Cable Kit 628532-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
Battery on page 35).
b. Service access cover (see
Service access cover on page 38).
Remove the hard drive:
1. Lift the Mylar (1) that covers the hard drive connector on the system board.
2. Disconnect the hard drive cable (2) from the system board.
3.
4. Remove the 3 Phillips 2.0×4.0 screws (3) that secure the hard drive to the computer.
5. Lift the Mylar (4) that covers the hard drive to allow removal of the drive.
40 Chapter 4 Removal and replacement procedures
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
Need help?
General
