Select To do this
Processor C4 State Enable/disable the processor C4 sleep state.
Boot Options Set the following boot options:
●
f10 and f12 Delay (sec.)―Set the delay for the f10 and f12
functions of Setup Utility in intervals of 5 seconds each (0, 5, 10,
15, 20).
●
HP QuickWeb―Enable/disable the HP QuickWeb menu in Setup
Utility.
●
Internal Network Adapter boot―Enable/disable boot from Internal
Network Adapter.
●
Boot Device Priority―Set the boot device priority for:
◦
Internal hard drive (select models only)
◦
USB floppy
◦
USB CD/DVD ROM drive
◦
USB flash drive
◦
USB Hard drive
◦
USB Card reader
◦
Network adapter
NOTE: Only the devices attached to the system appear in
the boot order menu.
Diagnostics menu
Select To do this
Hard Disk Self Test (select models only) Run a comprehensive self-test on the hard drive.
Memory Test Run a diagnostic test on the system memory.
74 Chapter 5 Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
Need help?
General
