Operating the Monitor
User’s Guide 4–17
User modes
The video controller signal may occasionally call for a mode that
is not preset and preload mode if:
■ You are not using a Compaq standard graphics adapter.
■ You are not using preset and preload modes.
If this occurs, you may need to readjust the parameters of the
monitor screen by using the on-screen display. User changes can
be made to any or all of these modes and saved in memory. The
monitor automatically stores the new setting, then recognizes the
new mode just as it does the preset and preload modes. In
addition to the 10 factory preset and preload modes, there are 10
user modes that can be entered and stored.
P930.book Page 17 Monday, September 9, 2002 12:20 PM
To Next Page
Loading...
Need help?
General
