Quick Start Guide
35
Filename: sb3usqs.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: JimL Last Saved By: kimt
Revision #: 159 Page: 35 of 134 Printed: 01/14/03 09:36 AM
Basics
Disabling the TV option
When you want to disconnect the TV from the
computer, you may need to disable the TV option
to return your computer display to its original
resolution.
To disable the TV option:
1 Right-click an empty area of the screen.
2 Click Properties.
3 Click the Settings tab.
4 Click the Advanced button.
5 Click the nView tab, and then select the
Standard [nView disabled] option.
Important:
If you viewed the PC image on just the
TV, do the following: With Standard [nView
disabled] selected under nView Modes, click
the Device Settings button, choose Select
Output Device, and then select the Analog
Display option.
6 Click the OK button, and then click OK again.
7 When the PC image appears on the monitor
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
To Next Page
Loading...
Need help?
General