HP pavilion Series User Manual

4. Remove the two Phillips M2.5×5.7 screws (2) and the three Phillips M2.0×5.7 screws (3) that secure
the bottom cover to the computer.
5. Remove the four Phillips M2.0×5.7 screws that secure the bottom cover to the computer.
6. Insert a case utility tool (1) or similar plastic, at-edged tool between the bottom cover
and the computer.
7. Release the bottom cover front edge (2) and swing it up and back until it releases.
8. Remove the bottom cover (3).
Reverse this procedure to install the bottom cover.
Component replacement procedures 25

HP pavilion Series Specifications

General

Brand	HP
Model	pavilion Series
Category	Laptop
Language	English