HP pavilion Series User Manual

Reverse this procedure to install the speakers.
Power connector cable
Description Spare part number
Power connector cable 808155-010
Before removing the power connector cable, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 24), and then remove the following components:
a. Battery (see Battery on page 26)
b. WLAN module (see WLAN module on page 29)
c. Fan (see Fan on page 33)
d. System board (see System board on page 34)
Remove the power connector cable:
▲
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
40 Chapter 5 Removal and replacement procedures

HP pavilion Series Specifications

General

Brand	HP
Model	pavilion Series
Category	Laptop
Language	English